page_head_bg

products

Glass Beads For Shot Peening AMS 2431/6C AGB-170

short description:

Surface treatment shot blasting glass beads have certain mechanical hardness, strength, and strong chemical stability. They are suitable for cleaning and polishing burrs and dirt on various mold surfaces so that the processed articles have a good finish and prolong their service life. Glass beads are widely used to treat workpiece surfaces with residual tension or under cyclic pressure to produce compressive stress layers for surface strengthening purposes. Use glass beads to strengthen the surface of the workpiece, reducing potential hazards such as surface erosion or surface fatigue.


Product Detail

Product Tags

3752cfg

Advantage

1.Surface treatment with glass beads is very economical and accurate.

2.The chemical nature of the glass beads is inert and non-toxic. During use, no iron or other harmful substances remain on the surface of the workpiece, nor will it adversely affect the surrounding environment.

3.With rich producing experience, the glass beads quality can control by adjusting the furnace temperature, the induced draft fan, and cooling water, so our product roundness is very high, and the glass beads appearance is clear without bubble

4.We worked with the glass factory, and choose the best raw material, it will give a promise on quality from resources.

5.We have 24 hours quality control system, to make sure each lot of glass beads quality is the same

6.Factory advantage, we can give the best competitive price

Physical Indicators

1. Rounding rate:  industrial shot peening beads ≥ 90%

2. Refractive index: ≥ 1.5

3. Hardness: Mohs 6-8

4. The main ingredients: sodium-calcium glass composition

5. Appearance: round, transparent, no obvious bubbles and impurities

6. Particle size between 45um and 1000um

7. Softening point: 710-730 °C

8. Density: 2.4-2.6g/cm3

Application

1.Matt surface treatment of stainless steel products (such as stainless steel sinks, cabinets, cookers, metal necessities, matte treatment)spherical glass beads for airfield markings

2.Cleaning of various abrasive tools, removing tensile stress of various parts and increasing fatigue resistance. Extend product life and improve resistance to stress and corrosion. (such as aircraft engine turbines, blades, shafts, landing gear, various spring gear hydraulic parts, etc.)

3.Integrated circuit plates; plastic sealing on the tube before tin cleaning and deburring

4.Medical machinery, paper machinery, textile Shot peening and finishing of machinery and all kinds of hardware products; surface treatment of various non-ferrous metal pipe fittings and precision castings, deburring, removing residue

5.Rust removal inside and outside of various types of parts, in addition to oxides, polishing to rough, Clearing stress.

6.Surface treatment of various jewelry watches, lamps, cosmetic bottles, and eyeglass accessories.


  • Previous:
  • Next:

  • Write your message here and send it to us